HEINZMANN Company Group

HEINZMANN Electric Drives
Robust electric motors up to 30 kW

HEINZMANN UK
Gas & Water Turbine Control

HEINZMANN China
Control & Actuation

REGULATEURS EUROPA
Control & Monitoring

HEINZMANN Automation
Marine Automation

CPK Automotive
Emission Control

HEINZMANN Australia
Steam Turbine Control

Giro Engineering
Diesel Engine Components

Technologies empowering efficiency 

The basic version of XIOS UC consists of the Main board (MC), extendable by up to 5 extension modules (MA) and an Expander Board MD1 or MD2.

I/O capacity of the Main Board:

Analogue/digital input Digital output Hall pick-up Sensor supply
11x 2x, max. 4A 2x 2x (5 or 12 VDC configurable)

The XIOS Expander boards MD1 or MD2 offer options for connecting further Extension Boards (MA).

I/O capacity of the Expander Board MD1:

Analogue/digital input Digital input Digital output Inductive pick-up Sensor supply Additional slots
8x 2x 2x, max. 4A 2x 1x (5 or 12 VDC configurable) 6x board MA

Board MD2 is required for the XIOSGenSet and XIOSCHP applications.

I/O capacity of the Expander Board MD2: all possibilities of MD1 and in addition

Digital Input Analogue input AVR output Relay output Addtional slots
4x, isolated 6x AC voltage (3x bus und 3x generator)
4x AC phase current, max. 5 A
1x 1x 3x board MA

  Each of the Extension Modules provides 2 (if isolated), 4 or 8 (if input-only) I/O channels, resulting in a great variety of
  configuration options:

Module type Function
 A2 4x analogue or digital output, monitored, 0...5 VDC (11 mA), 0...24 mA
digital output, max. 1 A PWM controlled (0...100 %)
 A3 4x analogue or digital input, 0...5/10/36 VDC, 0...24 mA
temperature input Pt 1000, Pt 200, Pt 100, Ni 1000, NTC
2x sensor supply (5/12 VDC configurable, 50 mA or VBAT)
 A4 2x analogue or digital input, electrically isolated, 0...5/10/36 VDC, 0...24 mA
temperature input Pt 1000, Pt 200, Pt 100, Ni 1000, NTC
2x sensor supply (5 VDC, 50 mA)
 A5 2x analogue or digital output, electrically isolated, 0...5 VDC (2.5 mA), 0...24 mA
digital output: 60 VDC/40 VAC, 400 mA static, optional: 400 VDC/280 VAC, 100 mA
 A6 2x analogue or digital output, electrically isolated, monitored, 0...5 VDC (10 mA), 0...24 mA
 A7 8x digital input, 9...36 VDC
 A8 up to 4x digital output, high or low-side, current read back for control-loop applications, thermal shutdown
 
 A1 2x thermocouple amplifier, electrically isolated, (J/K/E/R/S/B/N), configurable gain and offset
 A9 1x H bridge output, up to 8 A static current, current read back for control-loop applications
  • Input/Output-Modules
  • XIOSUC Input-Output Module
  • ICENI I/O Modules

Input/Output-Modules

HEINZMANN offers modular I/O modules that stand out by offering a high degree of flexibility and performance.

Reihe Input Output Module

XIOSUC Input-Output Module

The modular, universal XIOS control system represents a new generation of ECUs. At its core lies the motherboard with a high-performance CPU and generous DRAM and FLASH memory. Thanks to the FPGA chip, the computing power can primarily be used for the CPU or PLC functions, as well as for control processes requiring a lot of processing power. In addition to the motherboard, several jumperless, configurable I/O modules can also be used. XIOS enables individual control functions based on CoDeSys (IEC 61131-3) or MATLAB®/Simulink® to be developed. It is also ideal for alarm and monitoring purposes.

Technical data

  • Processor: 32 Bit 264 MHz
  • Communication interfaces: Ethernet, CAN, RS-232, RS-485
  • Display: 4.3" (optional)
  • Degree of protection: IP20
  • Power supply: 9...32 VDC

Engine Types & Applications

Diesel EnginesDiesel Engines

Gas EnginesGas Engines

Dual-Fuel EnginesDual-Fuel Engines

TurbinesTurbines

GensetsGensets

Industrial PlantsIndustrial Plants

ShipsShips

LocomotivesLocomotives

Industrial VehiclesIndustrial Vehicles

ICENI I/O Modules

The I/O modules in the ICENI range can be used for communicating with a PC or PLC devices, or for expanding the RE Viking35 ECU. The modules are mounted on standardised rails and have been designed with value for money in mind. They can be easily programmed using a touchscreen, without the need for support from a programmer or laptop. ICENI has been designed for high-performance operation under the high temperatures in the engine, but is equally suitable for other applications – whether as an extension of RE control and monitoring solutions or as a product for other original equipment manufacturers.

Technical data

  • Open protocols: for SPS, PC, etc.
  • Extended temperature range: -20 ... +70 °C
  • Built in user interface: integrated
  • Redundant power supply capability: possible
  • Configuration: plug & play

Engine Types & Applications

ShipsShips

GensetsGensets

  • Setpoint Adjusters for Digital Governors
  • SW 01-1-b
  • SW 02-10-b

Setpoint Adjusters for Digital Governors

To specify the setpoint for all HEINZMANN speed governors, we offer high-quality potentiometers in both a 1-turn and a 10-turn with additional resistors for shortcut or broken cable detection.

Sollwerpotentiometer 2

 

SW 01-1-b

1-turn setpoint potentiometer for digital HEINZMANN governors.

 

SW 02-10-b


10-turn setpoint potentiometer for digital HEINZMANN governors.

 

 
  • Setpoint Adjusters for Analogue Governors
  • SW 01-1-0
  • SW 02-10-0
  • SW 03-1-M-15 sec
  • SW 04-10-M-150 sec
  • SW 07-1-M-120 sec
  • ESW 01
  • SW 09-URI
  • EFP (Electronic Food Pedal)

Setpoint Adjusters for Analogue Governors

To specify the setpoint for analogue HEINZMANN speed governors, we offer many different types of potentiometers to meet different requirements. The range includes rotary potentiometers, motor potentiometers, electronic potentiometers as well as foot pedals and similar adjustment aids.

Reihe Potentiometer

 

SW 01-1-0

1-turn setpoint potentiometer for HEINZMANN electronic speed governors.

 

 

SW 02-10-0

10-turn setpoint potentiometer for HEINZMANN electronic speed governors.

 

SW 03-1-M-15 sec

Speed setting potentiometers for HEINZMANN electronic speed governors. Permitting manual or electrical remote speed adjustment either.

Technical data

  • Rise time: approx. 15 sec

More information

Manual

SW 04-10-M-150 sec

Speed setting potentiometers for HEINZMANN electronic speed governors. Permitting manual or electrical remote speed adjustment either.

Technical data

  • Rise time: approx. 150 seconds

More information

Manual

SW 07-1-M-120 sec

Speed setting potentiometers for HEINZMANN electronic speed governors. Permitting manual or electrical remote speed adjustment either.

Technical data

  • Rise time: approx. 120 seconds

More information

Manual

ESW 01

The ESW 01 electronic motor potentiometer is used in conjunction with the analogue HEINZMANN speed governors. It converts clocked pulses into an analogue speed setpoint signal that can be used for the electronic governor.

Technical data

  • Rise time: min. 10 s / max. 35 s

More information

Manual

 

SW 09-URI

Setpoint Interface. Converting a current or voltage signal into an analogue speed setting signal.

Technical data

  • Input range: 0 - 10 V or 0 - 20 mA

EFP (Electronic Food Pedal)

Electronic signal trandsducer, converting a rotary position to an analogue voltage signal processable by a speed governor

Technical data

  • Angular rotation: 0-45°
  • Output range: 1 - 5 V or 4 - 20 mA
  • Power Supply
  • NG 01-2 / NSV 01-2
  • NG 04 / NSV 03
  • NG 08 / NSV 05
  • NG 09
  • NG 10
  • DC-DC Converter

Power Supply

A supply voltage of 24 VDC is required to run HEINZMANN electronics governors. In order to ensure this, HEINZMANN offers various power supply units in different sizes to suit different power requirements. Some models also feature an emergency power supply so that the governor can continue working in the event of an emergency. For that HEINZMANN applies tried-and-tested components from PHOENIX CONTACT.

 

 

 

Power Supplies NG 01-2 / NSV 01-2

A three-phase power supply unit for analogue or digital speed governors with an emergency power supply.

  • Maximum actuator size is the HEINZMANN StG 30
  • Suitable for marine applications

 

More information

Manual

 

Power Supplies NG 04 / NSV 03

A one-phase power supply unit for analogue or digital speed governors with an emergency power supply.

  • Maximum actuator size is the HEINZMANN StG 30
  • Suitable for marine applications

More information

Manual


 

 

Power Supplies NG 08 / NSV 05

A three-phase power supply unit for analogue or digital speed governors with an emergency power supply.

  • Maximum actuator size is the HEINZMANN StG 180
  • Suitable for marine applications

More information

Manual


 

 

Power Supplies NG 09

A three-phase power supply unit for analogue or digital speed governors.

  • Maximum actuator size is the HEINZMANN StG 180

 

More information

Manual


 

 

Power Supplies NG 10

A three-phase power supply unit for analogue or digital speed governors

  • Maximum actuator size is the HEINZMANN StG 30

 

More information

Manual

 

DC-DC Converter

Voltage transformer from 24 V to 43 V for supplying actuators with a higher voltage.

More information

Data Sheet

We use cookies on our website. Some of them are essential for the operation of the site, while others help us to improve this site and the user experience (tracking cookies). You can decide for yourself whether you want to allow cookies or not. Please note that if you reject them, you may not be able to use all the functionalities of the site.