HEINZMANN Company Group

HEINZMANN Electric Drives
Robust electric motors

REGULATEURS EUROPA
Control & Monitoring

HEINZMANN China
Control & Actuation

HEINZMANN Automation
Marine Automation

HEINZMANN UK
Gas & Water Turbine Control

HEINZMANN Australia
Steam Turbine Control

CPK Automotive
Emission Control

Giro Engineering
Diesel Engine Components

Technologies empowering efficiency 

To complement the engine management systems, HEINZMANN offers not only input/output modules but also setpoint potentiometers for analogue and digital governors, as well as power supply units.

 
  • Input/Output-Modules
  • XIOSUC Input-Output Module
  • ICENI I/O Modules

Input/Output-Modules

HEINZMANN offers modular I/O modules that stand out by offering a high degree of flexibility and performance.

Reihe Input Output Module

XIOSUC Input-Output Module

The modular, universal XIOS control system represents a new generation of ECUs. At its core lies the motherboard with a high-performance CPU and generous DRAM and FLASH memory. Thanks to the FPGA chip, the computing power can primarily be used for the CPU or PLC functions, as well as for control processes requiring a lot of processing power. In addition to the motherboard, several jumperless, configurable I/O modules can also be used. XIOS enables individual control functions based on CoDeSys (IEC 61131-3) or MATLAB®/Simulink® to be developed. It is also ideal for alarm and monitoring purposes.

Technical data

  • Processor: 32 Bit 264 MHz
  • Communication interfaces: Ethernet, CAN, RS-232, RS-485
  • Display: 4.3" (optional)
  • Degree of protection: IP20
  • Power supply: 9...32 VDC

Engine Types & Applications

Diesel EnginesDiesel Engines

Gas EnginesGas Engines

Dual-Fuel EnginesDual-Fuel Engines

TurbinesTurbines

GensetsGensets

Industrial PlantsIndustrial Plants

ShipsShips

LocomotivesLocomotives

Industrial VehiclesIndustrial Vehicles

ICENI I/O Modules

The I/O modules in the ICENI range can be used for communicating with a PC or PLC devices, or for expanding the RE Viking35 ECU. The modules are mounted on standardised rails and have been designed with value for money in mind. They can be easily programmed using a touchscreen, without the need for support from a programmer or laptop. ICENI has been designed for high-performance operation under the high temperatures in the engine, but is equally suitable for other applications – whether as an extension of RE control and monitoring solutions or as a product for other original equipment manufacturers.

Technical data

  • Open protocols: for SPS, PC, etc.
  • Extended temperature range: -20 ... +70 °C
  • Built in user interface: integrated
  • Redundant power supply capability: possible
  • Configuration: plug & play

Engine Types & Applications

ShipsShips

GensetsGensets

  • Setpoint Adjusters for Digital Governors
  • SW 01-1-b
  • SW 02-10-b

Setpoint Adjusters for Digital Governors

To specify the setpoint for all HEINZMANN speed governors, we offer high-quality potentiometers in both a 1-turn and a 10-turn with additional resistors for shortcut or broken cable detection.

Sollwerpotentiometer 2

 

SW 01-1-b

1-turn setpoint potentiometer for digital HEINZMANN governors.

 

SW 02-10-b


10-turn setpoint potentiometer for digital HEINZMANN governors.

 

 
  • Setpoint Adjusters for Analogue Governors
  • SW 01-1-0
  • SW 02-10-0
  • SW 03-1-M-15 sec
  • SW 04-10-M-150 sec
  • SW 07-1-M-120 sec
  • ESW 01
  • SW 09-URI
  • EFP (Electronic Food Pedal)

Setpoint Adjusters for Analogue Governors

To specify the setpoint for analogue HEINZMANN speed governors, we offer many different types of potentiometers to meet different requirements. The range includes rotary potentiometers, motor potentiometers, electronic potentiometers as well as foot pedals and similar adjustment aids.

Reihe Potentiometer

 

SW 01-1-0

1-turn setpoint potentiometer for HEINZMANN electronic speed governors.

 

 

SW 02-10-0

10-turn setpoint potentiometer for HEINZMANN electronic speed governors.

 

SW 03-1-M-15 sec

Speed setting potentiometers for HEINZMANN electronic speed governors. Permitting manual or electrical remote speed adjustment either.

Technical data

  • Rise time: approx. 15 sec

More information

Manual

SW 04-10-M-150 sec

Speed setting potentiometers for HEINZMANN electronic speed governors. Permitting manual or electrical remote speed adjustment either.

Technical data

  • Rise time: approx. 150 seconds

More information

Manual

SW 07-1-M-120 sec

Speed setting potentiometers for HEINZMANN electronic speed governors. Permitting manual or electrical remote speed adjustment either.

Technical data

  • Rise time: approx. 120 seconds

More information

Manual

ESW 01

The ESW 01 electronic motor potentiometer is used in conjunction with the analogue HEINZMANN speed governors. It converts clocked pulses into an analogue speed setpoint signal that can be used for the electronic governor.

Technical data

  • Rise time: min. 10 s / max. 35 s

More information

Manual

 

SW 09-URI

Setpoint Interface. Converting a current or voltage signal into an analogue speed setting signal.

Technical data

  • Input range: 0 - 10 V or 0 - 20 mA

EFP (Electronic Food Pedal)

Electronic signal trandsducer, converting a rotary position to an analogue voltage signal processable by a speed governor

Technical data

  • Angular rotation: 0-45°
  • Output range: 1 - 5 V or 4 - 20 mA
  • Power Supply
  • NG 01-2 / NSV 01-2
  • NG 04 / NSV 03
  • NG 08 / NSV 05
  • NG 09
  • NG 10
  • DC-DC Converter

Power Supply

A supply voltage of 24 VDC is required to run HEINZMANN electronics governors. In order to ensure this, HEINZMANN offers various power supply units in different sizes to suit different power requirements. Some models also feature an emergency power supply so that the governor can continue working in the event of an emergency. For that HEINZMANN applies tried-and-tested components from PHOENIX CONTACT.

 

 

 

Power Supplies NG 01-2 / NSV 01-2

A three-phase power supply unit for analogue or digital speed governors with an emergency power supply.

  • Maximum actuator size is the HEINZMANN StG 30
  • Suitable for marine applications

 

More information

Manual

 

Power Supplies NG 04 / NSV 03

A one-phase power supply unit for analogue or digital speed governors with an emergency power supply.

  • Maximum actuator size is the HEINZMANN StG 30
  • Suitable for marine applications

More information

Manual


 

 

Power Supplies NG 08 / NSV 05

A three-phase power supply unit for analogue or digital speed governors with an emergency power supply.

  • Maximum actuator size is the HEINZMANN StG 180
  • Suitable for marine applications

More information

Manual


 

 

Power Supplies NG 09

A three-phase power supply unit for analogue or digital speed governors.

  • Maximum actuator size is the HEINZMANN StG 180

 

More information

Manual


 

 

Power Supplies NG 10

A three-phase power supply unit for analogue or digital speed governors

  • Maximum actuator size is the HEINZMANN StG 30

 

More information

Manual

 

DC-DC Converter

Voltage transformer from 24 V to 43 V for supplying actuators with a higher voltage.

More information

Data Sheet

We use cookies on our website. Some of them are essential for the operation of the site, while others help us to improve this site and the user experience (tracking cookies). You can decide for yourself whether you want to allow cookies or not. Please note that if you reject them, you may not be able to use all the functionalities of the site.