The high-pressure pumps from the HDP-K range feature a unique crank mechanism. They offer the greatest possible efficiency and resilience and are ideally suited to the requirements of harsh industrial environments. The special design aims to minimise the wear on pumps and pistons. As such, HDP-K high-pressure pumps ensure efficient operation whilst requiring little maintenance.
The new generation of ICR-DS injectors has been designed to eliminate static leakage, and reduces the return flow of fuel by 75 % compared to conventional injectors. By integrating the accumulator volume, pressure peaks inside the injector are reduced by 25 %. This produces a uniform, consistent flow of fuel, which is crucial for operation with heavy oil in particular.
Pressure-limiting valves for protecting common rail systems against excess pressure; with fast-switching action for rapidly reducing the pressure.
Medium injector for engines with a cylinder output of up to 100 kW. Injection pressure of up to 2,200 bar, injection quantity from 10 to 500 mm3 per injection process. Suitable for distilled diesel fuels.
Medium injector for engines with a cylinder output of up to 200 kW. Injection pressure of up to 2,500 bar, injection quantity from 50 to 2,500 mm3 per injection process. Suitable for distilled diesel fuels.
Large injector for engines with a cylinder output of up to 300 kW. Injection pressure of up to 2,200 bar, injection quantity from 50 to 4,000 mm3 per injection process. Suitable for operation with heavy oil.
Large injector for engines with a cylinder output of up to 500 kW. Injection pressure of up to 2,200 bar, injection quantity from 70 to 9,000 mm3 per injection process. Suitable for operation with heavy oil.
Large injector for engines with a cylinder output of up to 1,250 kW. Injection pressure of up to 2,400 bar, injection quantity from 150 to 14,000 mm3 per injection process. Suitable for operation with heavy oil.
The HEINZMANN high-pressure accumulators have been tailored to the respective engine characteristics..
Pressure is limited, then reduced to the holding pressure (“limp home”); triggered upon reaching the configured excess-pressure value or, alternatively, forced opening when venting compressed air.
Governors Industrial Vehicles
DC 10
HEINZMANN governors are acknowledged for their high flexibility, long life cycle and proven reliability. The range of digital controllers are applicable to any size, type or make of industrial vehicle. For each operating mode, HEINZMANN governors excellently master the varying conditions with regard to governing mode, maximum torque, droop, setpoint ranges and other functions.
Digital speed governor from the ORION range for combination with the HEINZMANN actuators StG 3005/3010, StG 2005 in 2Q mode and linear actuators, and for direct installation on the engine.
Technical data
More information
Diesel Engines
Gas Engines
Industrial Vehicles
Aktuators Industrial Vehicles
LA 25 / LA 30 / LA 35
StG 2005 DP / 2040 DP
For more than 100 years, HEINZMANN has been developing and producing extremely efficient actuators with different power levels and modes of operation, covering all areas of application. Our renowned electrical and hydraulic actuators can be easily installed in any type of engine and are suitable for use as original equipment or for retrofits. Some of the control unit and actuator combinations allow bi-directional torque output. Power consumption is kept extremely low. In addition, the actuators are equipped with a noncontact feedback system.
Linear Actuators
Technical data
Diesel Engines Gas Engines Industrial VehiclesThe DP versions of our actuators have been designed for direct installation on conventional diesel injection pumps, and are driven by HEINZMANN digital governors. They are mainly used in industrial engines producing 100 to 1000 kW. They are primarily used to replace mechanical governors in diesel and dual-fuel engines, allowing them to benefit from the additional functions provided by electronic governors.
Technical data
Diesel Engines Industrial vehicles
Software
The DcDesk software is a configuration and visualisation tool for all digital HEINZMANN systems. It comes with all functions for commissioning, monitoring and maintenance/diagnosis.
We use cookies on our website. Some of them are essential for the operation of the site, while others help us to improve this site and the user experience (tracking cookies). You can decide for yourself whether you want to allow cookies or not. Please note that if you reject them, you may not be able to use all the functionalities of the site.
