| analogue input | analogue output | digital input | digital output | inductive pick-up | PWM input | PWM output | temperature input | alarm / ready output |
CAN | |
| Port 1-4 | X | |||||||||
| X | ||||||||||
| X | ||||||||||
| X | ||||||||||
| Port 5 | X | |||||||||
| X | ||||||||||
| 4x 4...20 mA or 0...5 V |
2x 4...20 mA 2x 0...5 V / 0...10 V |
4x | 2x | 1x Pt 1000 or Ni 1000 1x NTC |
2x | optional |
Tailor-made systems for locomotives
HEINZMANN develops, produces and distributes all components for conventional fuel injection such as governors, actuators and sensors. Depending on application, they provide the necessary control, protection and monitoring functions. In diesel-electric locomotives, they take over speed control of the prime mover as well as load control of the generator (AD/DC). This ensures maximum traction efficiency with variable excitation control.
- Adjustable start fuel limitation
- Speed set-point as a notch position, CAN bus, voltage or current signals
- Speed and excitation ramps for smooth range transition
- Adjustable PID maps for optimisation of engine dynamic at all operation points
- Various limiting function e.g. engine speed or/and boost pressure dependant.
- Extended engine monitoring and safety
- Engine protection
- PEGASOS SYSTEM
- Control Panel
- DC 2-02
- StG 6 / StG 10
- StG 16 / StG 30 / StG 40
- StG 2010 / 2040 / 2080
- Sensors
- Software
PEGASOS traction control system
The PEGASOS digital control systems are proven in numerous railway applications. The HEINZMANN HELENOS control unit DC 2-02 forms the core of the system in combination with a choice of HEINZMANN actuators. Further system components for diesel-electric locomotives are:
- Interface panel containing DC/DC converter for supply voltages > 24 VDC
- Locomotive interface
- Sensors for temperature and pressure
- Complete cable harness
- Junction box
- HEINZMANN configuration software DcDesk
Diesel-hydraulic locomotives with up to 24 VDC supply don’t require additional equipment and can omit potential separation. Optional are input/output extension units and CAN bus interface.
PEGASOS Control Panel
The PEGASOS controller is a modular electronic system including:
- digital controller DC 2-02
- interface with excitation signal amplifier module and optional
I/O extension units for analog and digital signals - DC/DC converter (24-110 VDC)
- optional CAN bus interface
All inputs and outputs are opto-isolated.
DC 2-02
Marketed under the name HELENOS, these digital speed governors can be directly combined with all HEINZMANN actuator types with a control torque of up to 40 Nm. The range is also certified to various standards (ATEX, marine, etc.)
Technical data
- Power supply: 24 VDC
- Degree of protection: IP55 oder IP00
- HELENOS I Governor for engines < 1 MW combination DC 2-02 with actuators StG 6/10
- HELENOS III Governor for engines < 4 MW combination DC 2-02 with actuators StG 16/30/40
- HELENOS IV Governor for engines < 800 kW combination DC 2-02 with BOSCH EDC actuators
- HELENOS V Governor for engines < 80 kW-120 kW combination DC 2-02 with actuators StG 2005 DP / 2040 DP
Engine Types & Applications
Diesel Engines
Gas Engines
Gas Turbines
Steam Turbines
Gensets
Pump Drives
Ships
Locomotives
Industrial Vehicles
StG 6 / StG 10
These actuators are mainly used in industrial engines. They are driven by analogue or digital HEINZMANN governors or by the JANUS positioning module.
Technical data
- TorqueMAX: 6 / 10 Nm
- Rotation: 36°
- Response time: 75 / 60 ms
- Feedback: analogue
Engine Types & Applications
Diesel Engines
Gas Engines
StG 16 / StG 30 / StG 40
These actuators are combined with analogue or digital governors or the HEINZMANN JANUS positioning module. They are mainly used in industrial engines.
Technical data
- TorqueMAX: 15 / 31,5 / 44 Nm
- Rotation: 42°
- Response time: 120 / 190 / 190 ms
- Feedback: analogue
Engine Types & Applications
Diesel Engines
Gas Engines
Turbines
StG 2010 / 2040 / 2080
These models are the most powerful versions in the 2000 actuator range, and can be driven by analogue and digital HEINZMANN governors and by positioning modules. They are used in diesel, gas and dual-fuel engines and can be integrated with various throttle valves for hot and cold engine applications. The brushless permanent magnet system makes this actuator series ideal for use with gas engines.
Technical data
- TorqueMAX: 0.8 / 2 / 7.4 / 11 Nm
- Rotation: 36° or 68°
- Response time: 40 ... 85 ms
- Feedback: analogue
Engine Types & Applications
Diesel Engines
Gas Engines
Dual-Fuel Engines
Sensors
HEINZMANN offers high-precision sensors for measuring temperature, pressure and speeds. Their flexible design means they can be ideally tailored to each product. HEINZMANN sensors are manufactured under the strictest quality standards and in accordance with recognised protection standards.
Software
The DcDesk software is a configuration and visualisation tool for all digital HEINZMANN systems. It comes with all functions for commissioning, monitoring and maintenance/diagnosis.
- Viking Traction Control
- Control Panel
- Viking35
- RE 2221-1G
- Power Unit
- Monitoring Unit
Viking Traction Control System
The Viking Traction Control unit is designed for the railway environment and houses the following main components:
- Viking Digital Controller ECU
- Speed switch pcb
- Protections module
- Interface circuitry
The engine protection provided by Viking Traction solutions provides de-rating with respect to measured parameters; this helps to ensure that the locomotive can continue to operate safely even if a fault is detected. As an additional feature Viking traction can interface with remote monitoring; thus allowing operational problems to be viewed and diagnosed at the depot.
Viking Control Panel 
Traction control panel with Viking35 ECU, performing the following core functionality:
- Speed governing
- Start interlocks
- Engine auxiliaries control during starting/running/stopping conditions
- 1st and 2nd stage engine protection
- Overspeed protection
- Independent engine shutdown by separate protection module
Viking35
An ECU with a high number of I/Os, suitable for a wide range of complex control and monitoring tasks in ships, locomotives and generators. The Viking35 has established itself as the ideal solution on the market for applications involving complex load sharing in particular. The user-friendly Viking Vision software or a corresponding hand-held device can be used to edit or display control and status parameters in real time. It is combined with hydraulic actuators from REGULATEURS EUROPA.
Technical data
- Power supply: 24 VDC
- Degree of protection: IP00
Engine Types & Applications
Diesel Engines
Dual-Fuel Engines
Turbines
Ships
Locomotives
Generators
RE 2221-1G
The 2221 is a proportional actuator where the position of the output shaft is proportional to the electrical input signal 0-1 A. This actuator is typically used in medium/high-speed diesel engines in generator systems or locomotives.
Technical data
- Output range ft lbf: 8, 12, 15, 25, 34
- Output range Nm: 11, 16, 20, 34, 46, 54
More information
Engine Types & Applications
Diesel Engines
Gensets
Locomotives
Steam Turbines
Power Unit
Provides regulated 28 VDC, 300 W power supply output for the traction control and monitoring units, derived from a power car supply input.
Protects components from power supply surges and transients in accordance with RIA12 requirements
Includes a back up battery for short periods of loss of main power.
Monitoring Unit
Collects system status data from ECU via serial communications and hardwired inputs as well as engine and power car status data via hardwired analogue and digital inputs (on external antenna) to produce statistical and alarm 'black box' data.
Main components: GPS, GSM, project-specific software, interface circuitry.