HEINZMANN hand-held programming devices provide easy access to the control system, and can be used to set parameters and read off measurements.
- No need for a PC
- Can be used as a mobile device
- Ideal for maintenance work
Generator Control
XIOSGenSet
Si-TEC Xtend CGC
Viking35
THESEUS DGM-02
Digital Generator Controls
HEINZMANN has a wide range of products for controlling generators. The multi-functional, digital and cost-efficient XIOSGenSet governor offers a wide range of solutions for controlling generators as well as protection and monitoring functions. It assumes sole, central responsibility for controlling the entire genset system.
The Si-TEC Xtend generator governor is a specialist for controlling steam turbines. Viking35 offers extensive configuration options and is combined with hydraulic actuators from REGULATEURS EUROPA. The tried-and-tested THESEUS governor is suitable for generators operated as islands or in parallel. As an option, it can be combined with HEINZMANN speed governors.
- Flexible
- Cost-efficient
- Wide product range
XIOSGenSet
A multi-functional, digital and cost-efficient system solution offering a wide range of solutions for controlling generators as well as protection and monitoring functions. Only a single central governor is required to control the entire genset system. The device’s multi-functional design means it can be used in the best way for each specific customer and the engine and generator control can be configured flexibly. XIOSGenSet can be used for island and parallel operation as well as for individual or group applications. The system is supplemented by a clear, user-friendly and easy-to-operate HMI.
Technical data
- Processor: 32 Bit 264 MHz
- Communication interfaces: Ethernet, CAN, RS-232, RS-485
- Display: 4.3" (optional)
- Degree of protection: IP20
- Power supply: 9...32 VDC
- Functional range: Customer-specific engine & generator monitoring system, scalable and flexible configuration, PC-based adaptation & HMI monitoring, genset monitoring and protection functions, interface with existing analogue load sharing, synchronisation, kW power control, kW load sharing, kVAr load sharing, voltage adjustment, cos Phi control, automatic sequence control, available as an option with speed governor, CAN, Modbus or SAEJ1939 communication protocol, with real-time alarm & logging function
Engine Types & Applications
GeneratorsSi-TEC Xtend CGC
The versatile CGC steam turbine governor with generator control is part of the Si-TEC range, which is developed and produced by HEINZMANN Australia. The CGC is the ideal solution for a wide range of steam turbine generators, including counter-pressure turbines, condensation turbines, regulated extraction turbines and turbines with a split shaft. The applications include power plants, sugar & paper mills, the preparation and processing of oil & gas, refineries, the petrochemical industry, the geothermal industry and systems involving multiple generators.
The Si-TEC Xtend CGC turbine governor is available in these variants:
CGC-D for diesel genset
CGC-G for gas genset
CGC-T for steam turbines
CGC-ET for extraction steam turbines
Viking35
This digital generator governor with extensive configuration options is suitable for highly complex CAN bus effective-load sharing applications involving up to 16 generators. The user-friendly Viking Vision software or a corresponding hand-held device can be used to edit or display control and status parameters in real time. It is combined with hydraulic actuators from REGULATEURS EUROPA.
Technical data
- Power supply: 24 VDC
- Degree of protection: IP00
Engine Types & Applications
Diesel Engines
Dual-Fuel Engines
Turbines
Ships
Locomotives GensetsTHESEUS DGM-02
This digital generator governor for generators operated as islands or in parallel can run with or without a HEINZMANN speed governor. Four versions are available: BASIC, MEDIUM, EXTENDED and GROUP.
Technical data
- Voltage input: 3-phase input: 240 - 480 VAC or 100 - 240 VAC
- Current inputs: 3-phase input: 0 - 5 A or 0 - 1 A
- Frequency: 45 - 65 Hz
- Power supply: 24 VDC (9 - 33 VDC)
More information
BASIC: Low-voltage governor with no adjustment options
MEDIUM: Low-voltage governor with different standard assignments and limited adjustment options
EXTENDED: Generator governor with numerous configuration and adjustment options for every voltage range
GROUP: Generator governor for generators operated as Group-to-Group or Group-to-Mains, with numerous configuration and adjustment options for every voltage range
Interfaces
ARGOS HMI
DGM-LMG-IF
User Interfaces
HEINZMANN supplies user interfaces for the display, operation and control of motors, generators or CHPs in different sizes and designs.
ARGOS
ARGOS is a user interface for interacting with one or more HEINZMANN control units. It shows numerous measurements as well as the status of the engine or generator using LEDs. ARGOS is intended for installation in control panels.
DGM-LMG-IF
A load sharing interface for analogue load sharing with the DGM-02 digital generator governor. Its variable voltage range enables it to connect to +/- load sharing lines.
CAN-Repeater CR-01
Accessories
CR-01 CAN Repeater – used as a repeater and opto-insulator for longer CAN connections, in order to prevent signal errors caused by differences in potential.
More information