Digital Speed Governors

HEINZMANN governors are recognised for their great reliability and durability along with their excellent performance. Available in a wide range, these speed governors are perfectly configurable in order to meet any application's requirements. Combined with the appropriate actuator, HEINZMANN control units make up high-quality governor systems for diesel engines, gas engines, dual fuel engines and gas turbines, water turbines, steam turbines.

 
Control Unit Speed Governor Applications /
Engine Types
Documents

XIOS UC1
XIOS ECU Engine Control Unit

 

The modular, universal XIOS controller presents an entirely new generation of ECU. It consists of a high-performance main board with high CPU power, large DRAM and FLASH memory. A FPGA logic chip leaves more computing power to the CPU for PLC functions or processor-intensive control tasks. Additional I/O boards can be attached to the main board in different number and type. They are configurable by software, jumperless and small in size. 
XIOS enables customers to develop their own control functions based on CoDeSys (IEC 61131-3) or MATLAB™/Simulink. It is applicable for alarm and monitoring purposes just as well. 

  • 32 Bit 264 MHz processor
  • Communication interfaces Ethernet, CAN, RS-232, RS-485
  • optional 4.3" display
  • Protection grade IP20 
  • Power supply: 9...32 VDC
  • Marine certified >> view certificates

Combustion engines
Turbines
Gensets

Leaflet XIOS

Data Sheet XIOS

Flyer XIOS-PLC

ADG-T
ADG-TT

Si-TEC ADG

The ADG (Advanced Digital Governor) for steam turbine drive applications is part of the Si-TEC product range developed and produced by HEINZMANN Australia. The ADG is the ultimate solution for steam turbine control performance and includes additional functions, features as well as communications for user-friendly operation.

  • Precise speed governing typically within 0.1 % of operating speed at steady state
  • Dual MPU (or Prox.) speed sensors for redundancy
  • Wide range of actuator interface options
  • Auto start and warm through sequence
  • Interpolating multiple speed PIDs
  • Process control for variable speed application (e.g. level control)
  • Single turbine governing used for constant or variable speed applications
  • Dual (tandem) turbine governing system (ADG-TT) used for constant or variable speed applications
  • Seamless (bumpless) transfer between control modes
  • Extensive user selected control functionality
  • Controlled test of over speed protection
  • Extensive alarm functions
  • On board diagnostics
  • Dedicated RS485 MODBUS® Port for customer PLC/DCS interface

Steam Turbines

Refineries
Petrochemical
Compressors
Pumps
Mills
Vessels

Data Sheet Si-TEC ADG
Viking35
governor ECU Viking 35

ECU with large range of I/O's for most diverse and complex control and monitoring tasks

Operated in conjunction with the range of hydraulic actuators by Regulateurs Europa

  • Protection grade IP00
  • Power supply: 24 VDC

Diesel engines
Dual Fuel Engines
Turbines

Marine
Rail Traction
Gensets

Data Sheet Viking35

DC 1-03
speed governor DC-1-03
DC 1-04
speed governor DC-1-04

Operating as part of PRIAMOS governor systems together with HEINZMANN rotary actuators with gearing
DC 1-04 driving up to 2 actuators

 

PRIAMOS I governor for engines < 5 MW
combination of DC 1-03 and actuators StG 16/30/40

PRIAMOS II governor for engines < 10 MW
combination of DC 1-03 and actuators StG 64/90

PRIAMOS III governor for engines < 15 MW
combination of DC 1-04 and actuator StG 180

Diesel engines
Gas Engines
Gas Turbines
Steam Turbines

Gensets
Pump drives
Vessels
Heavy-duty vehicles

Basic Manual
-Login required-

Manual PRIAMOS I

Manual PRIAMOS II

Manual PRIAMOS III

DC 2-02
speed governor DC-2
speed governor DC-2 / IP-55

Operating as part of HELENOS governor systems together with direct acting rotary actuators

 

HELENOS I governor for engines < 1 MW
combination of DC 2-02 and actuators StG 6/10

HELENOS III governor for engines < 4 MW
combination of DC 2-02 and actuators StG 16/30/40

HELENOS IV governor for engines < 800 kW
combination of DC 2-02 and actuators BOSCH EDC

HELENOS V governor for engines 80 kW-120 kW
combination of DC 2-02 and actuators StG 2005DP / 2040 DP

Diesel engines
Gas Engines
Gas Turbines
Steam Turbines

Gensets
Pump drives
Marine
Rail Traction
Heavy-duty vehicles

Data Sheet DC 2-02

Basic Manual
-Login required-

Manual HELENOS I

Manual HELENOS III

Manual HELENOS IV

Manual HELENOS V

>> See download area for Russian manuals

DC 5
speed governor DC 5

Especially robust and enduring controller for challenging operating conditions of industrial vehicles, operating together with small-size HEINZMANN actuators StG 3005/3010, StG 2005 and linear actuator series

  • Power supply: 24 VDC, 12 VDC
  • Protection grade IP66

Diesel engines

Heavy-duty vehicles

 

DC 6
speed governor DC-6
speed governor DC-6 - IP55

Operating as part of most powerful PANDAROS governors together with any type of HEINZMANN actuator up to 30 Nm torque

  • Power supply: 24 VDC, 12 VDC
  • Protection grade IP55 or IP00
  • Marine certified
  • Explosive atmospheres certified >> view certificate

 

PANDAROS I governor for engines < 1 MW
combination of DC 6 and actuators StG 6/10

PANDAROS II governor for engines < 2 MW
combination of DC 6 and actuators StG 2005, StG 2010/2040/2080

PANDAROS III governor for engines < 3 MW
combination of DC 6 and actuators StG 16/30

PANDAROS IV governor for engines  80 kW-120 kW
combination of DC 6 and actuators StG 2005DP / 2040 DP

Twin-PANDAROS: extended version for control of 2 actuators

Diesel engines
Gas Engines

Gensets
Pump drives
Marine
Heavy-duty vehicles

Data Sheet DC 6

Basic Manual
-Login required-

Manual PANDAROS I

Manual PANDAROS II

Manual PANDAROS III

Manual PANDAROS IV

>> See download area for Russian manuals

DC 6.200
DC 6 200 speed governor

Low current version of DC 6, combined with small actuators requiring drive currents up to 200mA, suitable for proportional electro-mechanical actuators, operating as positioner

  • Power supply: 12 VDC, 24 VDC
  • Protection grade IP00

Gas turbines
Steam turbines
Water turbines

Gensets
Heat Pumps

Data Sheet DC 6.200
DC 7
speed governor DC 7

Economic, robust and enduring controller for diesel engines in on- and off-road vehicles, driving EDC actuators of BOSCH injection pumps directly or operating together with HEINZMANN StG 2010/2040/2080 actuators or LA 25/30 linear actuators in 2Q-operation.

  • Power supply: 24 VDC
  • Protection grade IP66K, IP X7, IP X9 DIN 40050

Diesel engines

Off-road vehicles

 

 

Leaflet ORION

Data Sheet DC 7

DC 8
speed governor DC-8

Operating as part of speed governor system together with actuators StG 2010/2040/2080.
Positioner capability and power management function, applicable as peripheral module to extend I/O abilities of main control unit and to drive another actuator
Version for marine propulsion engines available with output 0-1 A, driving the range of RE hydraulic actuators

  • Power supply: 24 VDC
  • Protection grade IP00
  • Galvanically insulated CAN bus interface

Diesel engines
Gas Engines
Turbines

Gensets
Heavy-duty vehicles

 
Data Sheet
DC 8
DC 9
speed governor DC-9

Economic controller with competitive price-performance ratio, operating as a part of ORION governor systems together with small-size HEINZMANN actuators StG 3005/3010, StG 2005 and linear actuator series

  • Power supply: 12 VDC, 24 VDC
  • Protection grade IP00
  • Without classification
Diesel engines
Gas Engines

Leaflet ORION

Data Sheet

Basic Manual
-Login required-

Manual ORION

DC 10
speed governor DC-10

Economic controller for direct engine mounting with competitive price-performance ratio, operating as a part of ORION governor systems together with small-size HEINZMANN actuators StG 3005/3010, StG 2005 in 2Q-operation and linear actuator series

  • Power supply: 9...30 VDC
  • Protection grade IP6K9K
Diesel engines
Gas Engines

Leaflet ORION

Data Sheet

DC 12
speed governor DC 12

Economic controller for direct engine mounting with competitive price-performance ratio, operating as a part of ORION governor systems, driving direct acting rotary StG 3005/3010, StG 2005 DP/2040 DP actuators in 4Q-operation

  • Power supply: 7...32 VDC
  • Protection grade IP6K9K

Diesel engines
Gas Engines

Gensets
Heavy-duty vehicles

Leaflet ORION

Data Sheet DC 12