Generator Management
THESEUS
HEINZMANN’s digital generator management control unit THESEUS DGM-02 is an all-rounder. Whether in island or mains parallel operation, single genset or group, there is an appropriate version for every application which, in conjunction with the HMI ARGOS or PANOPTES, provides a comfortable and user-friendly system. All THESEUS control units are marine classified.
| Product | Description | Application | PDF  |
|
| THESEUS DGM 02 |
 |
Digital Power Management System THESEUS DGM 02 The THESEUS DGM 02 unit includes all required functionality for Power Management for Island and Mains Parallel Operation. It is available in 4 different versions: BASIC, MEDIUM, EXTENDED and GROUP. |
|
|
| PANOPTES 02 HMI |
 |
Touch Screen Unit for THESEUS Digital Generator Management DGM-02 |
|
Leaflet Panoptes HMI |
| ARGOS |
 |
Display unit for HEINZMANN Digital System. |
|
Manual ARGOS |
| ESW 01 |
 |
Electronics Setting Potentiometer ESW01 To be used with with Heinzmann governing systems in the range from E1/2-F up to E40 and E2000. ESW01 is converting digital speed Increase/Decrease to an analogue. |
Manual ESW 01 |
|
| AT 01 |
 |
Analogue Generator Management AT 01 The AT 01 unit includes a synchroniser, a load sharer, a load ramp and an integrated soft loading. |
|
|
| AT 10-01 |
 |
Analogue Generator Management AT 10-01 The AT 10-01 is a costeffective unit for singlephase application. It includes a synchroni- ser, a load sharer and a load ramp. |
|
|
| LMG 11 |
 |
Analogue isochro- nous KW Load sha- ring unit LMG 11 This unit replaces the LMG 10-01 load sharer. It is used for isochronous load sharing between several parallel operating gensets. |
|
Manual LMG 11 |
| SyG 02 |
 |
Analogue Synchro- coupleur unit SYG02 The SyG 02 synchroni- ser has threephase voltage detection with frequency and phase control over a paralleled generator. The unit has direct control of the generator speed and will pull a generator into synchronism from within +/- 2 Hz of synchronous frequency. |
|
Manual SyG 02 |
| LMG IF-02 |
 |
Load share inteface unit LMG-IF-02 The Load Share Interface Unit LMG-IF-02 is used to couple load share lines of differing systems which work at different voltage levels. |
|
Manual LMG IF 02 |
| LR 01 |
 |
Ramp Generator unit LR-01 Accessories for LMG10-01 which gives possibility to ramp up or down the load of generators connected with grid. |
|
|
| LSchG 02 |
 |
2 Chanel Load Switch unit LSchG-02 Accessories for load sensor: needs a load-sensitive control signal of 0-5V. |
|
|
| LKG 02 |  |
Load Import/Export controller LKG 02 Accessories for LMG 10-01 LKG02 makes a regulation for load import / export. |
|
|
| GSLU 01 |  |
Ramp Generator GSLU 01 Accessories for LMG 10-01 the GSLU 01 unit allows parallel engines to isochronously load ramp in mains parallel and island applications. |
|
Manual GSLU 01 |
| SPAG 03 |  |
Voltage Matching Unit SPAG 03 The voltage matching unit will match the voltages between the generator and a BUS. The output is a raise / lower signal which will interface to the AVR motor potentiometer. |
|
|
| PFC 01 |  |
Cosinus Phi Regler PFC-01 The power factor controller allows the control of reactive load via a motor potentiometer connected to the generator AVR. |
|
|
| BSBG 01 |  |
Analogue Speed rampe BSBG 01 Makes analogue speed ramp adjust. |
|
|
| SFBG 03 |  |
Analogue Start fuel limiter or Load limiter Additional functionality for control units in the range of KG 6 to KG 40. |
|
|
| SA 02 | Load Anticipation unit SA 02 This unit when detecting load inpact (positive or negative) will immediately adjust the speed in order to avoid a speed drop. |
|
||
| Generator Accessories - Comprehensive Analogue and Digital Range |
 |
|
|
Leaflet Speed Governor Generator Accessories |
